Pioneer KURO PLASMA TV太贵，而且Pioneer退出面板制造，改为支持panasonic所制plasma面板，所以考虑再三，最近入手panasonic Plasma Television 一台，由于新机的遥控器有微调，现将亲手试过的工程菜单奉献给大家，以便大家购买后可以及时复核使用时间和开机次数。 X1 / S1 / G10 / G15 / V10 • Hold down the {VOL -} button ON THE PLASMA. • Press the {INFO} button on the remote control 3 times. • The Service Menu will be displayed with the following menus: • ADJUST • WD-ADJUST • OPTION • AGING (Red Screen) • RM-SET • SRV-TOOL The {1} & {2} buttons move through menus (up/down). • Press the {2} button once or press the {1} button six times to select "SRV-TOOL". • Then press the {OK} button to access it. • Using the cursor keys, * highlight * the empty right side of the last option: PTCT :00.00.00.00.00 |----------------------|---------------------| | TD2Microde: 81c0000f | |----------------------|---------------------| | Flash ROM: 1 - 227 e | |----------------------|---------------------| | PTCT :00.00.00.00.00 | * HIGHLIGHT HERE * |----------------------|---------------------| • Then press and hold the {MUTE} button for 3 seconds. • Time and Count will be displayed in red color. TIME = Hours and minutes of operation. COUNT = Times the Plasma was powered on. • To exit, press and hold the {POWER} button on the Plasma for few seconds. <<<< WARNING - WARNING - WARNING >>>> The {VOL+} and {VOL -} buttons are used to change values in the Service Menu. Make sure not to touch those buttons anytime while checking the hours used. |
