|
结合最近菲菲tx在安装新电脑的过程所遇到的xp系统安装盘无法识别sata硬盘的问题,以及前段时间阿狗tx试图vista laptop转成xp laptop所遇到的类似的硬盘无法被识别的问题。 阿狗tx经过一番research,现整理solution——DIY自己的可识别sata硬盘的xp启动盘,如下: Required Software Download the following software below and install ImgBurn and IsoBuster. 1. ImgBurn - http://www.imgburn.com/ 2. IsoBuster - http://www.isobuster.com/ 3. DriverPacks BASE & DriverPack MassStorage - http://driverpacks.net/DriverPacks/ Getting started 1. Make 2 folders on your c:\ . Name them wxp and dp. Don’t make them on the desktop! 2. Copy all the files and folders on the Windows XP disc to the wxp folder. 3. While your Windows XP disc is in the drive right down the volume name. 4. Install IsoBuster and start it up, when it asks, click on free function only. 5. In the left hand box left-click on Bootable Disc. 6. In the right hand box right-click on .img file and select Extract .img file and save the file in your wxp folder. 7. Double click on the file DPs_BASE_805.exe that you should have downloaded earlier. When the extract to box pops up, type c:\dp and click Extract. 8. Move the file DP_MassStorage_wnt5_x86-32_805.7z to the c:\dp\DriverPacks folder. Do not extract it. 9. In the dp folder find DPs_BASE.exe and double click it start the program. 10. In the left hand box expand Settings and select Location as c:\wxp 11. In the left hand box Select DriverPacks, On the right hand side check off DriverPack MassStorage 8.05 & DriverPack MassStorage text mode. 12. In the left hand box select DriverPacks method, and on the right hand side select method 1. 13. In the left hand box expand Optional settings and select KTD. On the right side select Enable KTD for ALL slipstreamed DriverPacks. 14. Down at the bottom press the Slipstream! button. 15. Start up ImgBurn. When started you will be presented with a menu. Select Write files/folders to disc. 16. On the left hand side, in the box under Source type c:\wxp 17. On the right hand side there is five tabs. On the Options tab: a. In the File System drop down menu select ISO9660 + Joliet. b. Under that check off Recurse Subdirectories, Include Hidden Files, and Include System Files. Leave the other boxes unchecked. 18. On the Labels tab type in the original volume label from your Windows XP disc, in the ISO9660 & Joliet boxes. 19. Under the Advanced tab there are 3 sub tabs, Dates, Restrictions, and Bootable Disc. On the Dates tab just leave it set to Use File Date & Time. 20. Then under the Restrictions tab there are 3 more sub tabs. ISO9660, Joliet, and UDF. A. On the ISO9660 tab: a. Under Folder/File Name Length, select Level X - 219 Characters. b. Under Character Set, select DOS and check off the four boxes below that. B. On the Joliet tab: a. Under Folder/File Name Length, select Level X - 110 Characters. b. Check off Allow Files Without Extensions and leave Add ‘,1’ Version Number To Files unchecked. 21. Go back to the Bootable Disc tab: a. Under Options, check off Make Image Bootable. b. In the Emulation Type drop down menu select None (Custom). c. In the Boot Image: box type c:\wxp\(refer to step 6).img. d. Change Sectors To Load from 1 to 4. 22. Finally start burning the disc by clicking on the picture of a folder with an arrow pointing to a disc, on the bottom left hand side. [ 本帖最后由 阿狗 于 2008-7-24 21:34 编辑 ] |